Brass pipe fittings
Hex Nipple
| No | Size |
|---|---|
|
1 |
1/8" Hex Nipple
|
|
2 |
1/4" Hex Nipple
|
|
3 |
3/8" Hex Nipple
|
|
4 |
1/2" Hex Nipple
|
NPT Hex Nipple are hex nipple with male thread at the both end to connect with female thread of system.
Coupling
| No | Size |
|---|---|
|
1 |
1/8" Coupling
|
|
2 |
1/4" Coupling
|
|
3 |
3/8" Coupling
|
|
4 |
1/2" Coupling
|
A Coupling (or Couple) (used in piping or plumbing) is a very short length of pipe or tube, with a socket at one or both ends that allows two pipes or tubes to be joined, welded (steel), brazed or soldered (brass) together.
Cored Hex head plug
| No | Size |
|---|---|
|
1 |
1/8" Cored Hex Head Plug
|
|
2 |
1/4" Cored Hex Head Plug
|
|
3 |
3/8" Cored Hex Head Plug
|
|
4 |
1/2" Cored Hex Head Plug
|
The cored hex-head plug fitting inserts into a pipe or fitting to close and terminate its end. it has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a tighter seal than straight threads.
Square head plug
| No | Size |
|---|---|
|
1 |
1/8" Square Head Plug
|
|
2 |
1/4" Square Head Plug
|
|
3 |
3/8" Square Head Plug
|
|
4 |
1/2" Square Head Plug
|
The head plug pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection. this solid square head plug fitting inserts into a pipe or fitting to close and terminate its end and has a square head for an increased bearing surface when adjusting with a wrench.
Counter Sunk Plug
| No | Size |
|---|---|
|
1 |
1/8" Counter Sunk Plug
|
|
2 |
1/4" Counter Sunk Plug
|
|
3 |
3/8" Counter Sunk Plug
|
|
4 |
1/2" Counter Sunk Plug
|
The counter sunk plug is a brass fitting with FNPT connections for use in water, oil, natural gas, and steam applications.
Hex bushing
| No | Size |
|---|---|
|
1 |
1/4 x 1/8" Hex Bushing
|
|
2 |
3/8 x 1/8" Hex Bushing
|
|
3 |
3/8 x 1/4" Hex Bushing
|
|
4 |
1/2 x 1/8" Hex Bushing
|
|
5 |
1/2 x 1/4" Hex Bushing
|
|
6 |
1/2 x 3/8" Hex Bushing
|
This Hex bushing is recommended for use with brass, copper, or iron pipe. it is made of brass for strength, durability and rust resistance. it is typically used in used on oil, natural gas, water and air line application.
Pipe cape
| No | Size |
|---|---|
|
1 |
1/4" Pipe Cap
|
|
2 |
3/8" Pipe Cap
|
|
3 |
5/8" Pipe Cap
|
|
4 |
1/2" Pipe Cap
|
Brass pipe thread caps are used to close off the end of a pipe, they are generally used as a long term fix.
Close Nipple
| No | Size |
|---|---|
|
1 |
1/8" Close Nipple
|
|
2 |
1/4" Close Nipple
|
|
3 |
3/8" Close Nipple
|
|
4 |
1/2" Close Nipple
|
In Plumbing and piping, a nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings….A “close nipple” has no unthreaded area, when screwed tightly between two female fittings, very little of the nipple remains exposed.
Long Nipple
| No | Size |
|---|---|
|
1 |
1/8 x 1.5" Long Nipple |
|
2 |
1/8 x 2" Long Nipple
|
|
3 |
1/8 x 2.5" Long Nipple
|
|
4 |
1/8 x 3" Long Nipple
|
|
5 |
1/8 x 3.5" Long Nipple |
|
6 |
1/8 x 4" Long Nipple |
|
7 |
1/4 x 1.5" Long Nipple
|
|
8 |
1/4 x 2" Long Nipple |
|
9 |
1/4 x 2.5" Long Nipple
|
|
10 |
1/4 x 3" Long Nipple
|
|
11 |
1/4 x 3.5" Long Nipple
|
|
12 |
1/4 x 4" Long Nipple |
|
13 |
3/8 x 1.5" Long Nipple
|
|
14 |
3/8 x 2" Long Nipple |
|
15 |
3/8 x 2.5" Long Nipple |
|
16 |
3/8 x 3" Long Nipple |
|
17 |
3/8 x 3.5" Long Nipple |
|
18 |
3/8 x 4" Long Nipple
|
|
19 |
1/2 x 1.5" Long Nipple |
|
20 |
1/2 x 2" Long Nipple
|
|
21 |
1/2 x 2.5" Long Nipple
|
|
22 |
1/2 x 3" Long Nipple
|
|
23 |
1/2 x 3.5" Long Nipple |
|
24 |
1/2 x 4" Long Nipple |
The long nipple is a longer version than the short, and is threaded on both ends with an expanse of plain unthreaded surface in the middle.
Reducing Hex Nipple
| No | Size |
|---|---|
|
1 |
1/4 x 1/8" Reducing Hex Nipple
|
|
2 |
3/8 x 1/8" Reducing Hex Nipple
|
|
3 |
3/8 x 1/4" Reducing Hex Nipple
|
|
4 |
1/2 x 1/4" Reducing Hex Nipple
|
|
5 |
1/2 x 3/8" Reducing Hex Nipple |
The reducing hex nipple pipe fitting is made of brass and has male national Pipe Taper (NPT) threaded connecotions….It has male NPT threads for connecting to female threaded pipes, creating a tighter seal than straight threads.
Reducing Coupling
| No | Size |
|---|---|
|
1 |
1/4 x 1/8" Reducing Coupling
|
|
2 |
3/8 x 1/8" Reducing Coupling
|
|
3 |
3/8 x 1/4" Reducing Coupling
|
|
4 |
1/2 x 1/4" Reducing Coupling
|
|
5 |
1/2 x 3/8" Reducing Coupling
|
A reducing coupling is designed to accept pipes into either end. For Example a 15mm to 10mm reducing coupling accepts a 15mm pipe into one end and 10mm pipe into the other. A 15mm to 10mm fitting reducer accepts a 10mm pipe into one end and the other end goes inside a 15mm fitting such as an below or coupling.
Adapter
| No | Size |
|---|---|
|
1 |
1/4 x 1/8" Adapter
|
|
2 |
1/4 x 1/4" Adapter |
|
3 |
3/8 x 1/8" Adapter
|
|
4 |
3/8 x 1/8" Adapter
|
|
5 |
3/8 x 1/4" Adapter
|
|
6 |
1/2 x 1/4" Adapter
|
|
7 |
1/2 x 3/8" Adapter
|
|
8 |
1/2 x 1/2" Adapter
|
With a high resistance to corrosives such as water, heat, saltwater, minerals, chemicals, and soils, brass adapters provide a strong and trusted fit for your hydraulic applications.